WREN C5 ESPHome

YAML Examples/WREN C5/wren-c5-esphome.yaml

@@ -0,0 +1,93 @@
+esphome:
+  name: wren-c5
+
+esp32:
+  board: esp32-c5-devkitc-1 
+  variant: esp32c5
+  framework:
+    type: esp-idf
+    
+# WREN C5 Test
+
+output:
+  - platform: gpio
+    pin: GPIO27
+    id: blue_led
+
+light:
+  - platform: binary
+    output: blue_led
+    id: heartbeat
+
+interval:
+  - interval: 500ms
+    then:
+      - light.toggle: heartbeat
+
+binary_sensor:
+  - platform: gpio
+    id: in_1a
+    name: "IN 1A"
+    pin:
+      number: GPIO8
+      mode:
+        input: true
+        pulldown: true
+
+  - platform: gpio
+    id: in_1b
+    name: "IN 1B"
+    pin:
+      number: GPIO9
+      mode:
+        input: true
+        pulldown: true
+
+  - platform: gpio
+    id: in_2a
+    name: "IN 2A"
+    pin:
+      number: GPIO14
+      mode:
+        input: true
+        pulldown: true
+
+  - platform: gpio
+    id: in_2b
+    name: "IN 2B"
+    pin:
+      number: GPIO13
+      mode:
+        input: true
+        pulldown: true
+
+  - platform: gpio
+    id: sflag
+    name: "Motor Driver Fault"
+    pin:
+      number: GPIO10
+      mode:
+        input: true
+        pulldown: true      
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: "xxxx="
+
+ota:
+  - platform: esphome
+    password: "xxxx"
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Wren-C5-Test Fallback Hotspot"
+    password: "xxxx"
+
+captive_portal:    
+
+logger: