WREN C5 ESPHome

YAML Examples/WREN C5/Basic Examples/wren-c5-test-added-inputs-adc-i2c.yaml

@@ -0,0 +1,171 @@
+esphome:
+  name: wren-c5
+
+esp32:
+  board: esp32-c5-devkitc-1 
+  variant: esp32c5
+  framework:
+    type: esp-idf
+
+# WREN C5 Test
+
+i2c:
+  sda: GPIO2
+  scl: GPIO3
+  scan: true
+
+switch:
+  - platform: gpio
+    id: rs485_enable
+    pin: GPIO23
+    restore_mode: ALWAYS_ON  
+
+output:
+  - platform: gpio
+    pin: GPIO27
+    id: blue_led
+
+light:
+  - platform: binary
+    output: blue_led
+    id: heartbeat
+
+interval:
+  - interval: 500ms
+    then:
+      - light.toggle: heartbeat
+
+binary_sensor:
+  - platform: gpio
+    id: in_1a
+    name: "IN 1A"
+    pin:
+      number: GPIO8
+      mode:
+        input: true
+        pulldown: true
+
+    on_press:
+      - logger.log: "IN_1A ON"
+
+    on_release:
+      - logger.log: "IN_1A OFF"        
+
+  - platform: gpio
+    id: in_1b
+    name: "IN 1B"
+    pin:
+      number: GPIO9
+      mode:
+        input: true
+        pulldown: true
+        
+    on_press:
+      - logger.log: "IN_1B ON"
+
+    on_release:
+      - logger.log: "IN_1B OFF"        
+
+  - platform: gpio
+    id: in_2a
+    name: "IN 2A"
+    pin:
+      number: GPIO14
+      mode:
+        input: true
+        pulldown: true
+        
+    on_press:
+      - logger.log: "IN_2A ON"
+
+    on_release:
+      - logger.log: "IN_2A OFF"
+
+  - platform: gpio
+    id: in_2b
+    name: "IN 2B"
+    pin:
+      number: GPIO13
+      mode:
+        input: true
+        pulldown: true
+        
+    on_press:
+      - logger.log: "IN_2B ON"
+
+    on_release:
+      - logger.log: "IN_2B OFF"        
+
+  - platform: gpio
+    id: sflag
+    name: "Motor Driver Fault"
+    pin:
+      number: GPIO10
+      mode:
+        input: true
+        pulldown: true
+
+    on_press:
+      - logger.log: "Motor Driver Fault ACTIVE"
+
+    on_release:
+      - logger.log: "Motor Driver Fault CLEARED"
+
+  - platform: gpio
+    id: en1
+    name: "EN1"
+    pin:
+      number: GPIO5
+      mode:
+        input: true
+
+    on_press:
+      - logger.log: "EN1 ON"
+
+    on_release:
+      - logger.log: "EN1 OFF"
+
+  - platform: gpio
+    id: en2
+    name: "EN2"
+    pin:
+      number: GPIO6
+      mode:
+        input: true
+
+    on_press:
+      - logger.log: "EN2 ON"
+
+    on_release:
+      - logger.log: "EN2 OFF"    
+
+sensor:
+  - platform: adc
+    pin: GPIO4
+    name: "Supply Voltage"
+    attenuation: auto
+    update_interval: 1s
+    filters:
+      - multiply: 44.4444      
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: "xxxx="
+
+ota:
+  - platform: esphome
+    password: "xxxx"
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "Wren-C5-Test Fallback Hotspot"
+    password: "xxxx"
+
+captive_portal:    
+
+logger: